Works to be taken to add 13Th channel
1. Backup NMX settings for the existing services.
2. Stop the NMX servers in domain manager
3. From domain manager/fail-safe>remove redundancy
4. Give new ID (12 to remove redundancy)
5. Restore 14th channel database in Backup server
6. Install lab encoder in NMX rack and connect input & output connections
7. Add MAC address in configuration and restart the encoder
8. Change channel name, video PID, Audio PID & PMT PID according to other channels without conflicting
9. In Statistical multiplex check bitrate for each channel
10. Assign bitrate as per our requirement
11. Enable 13th channel and check output in output service configuration (14th channel is disabled)
12. Check all green for ok
13. Take backup server as master server
14. Then restore databe of 13 channel (fresh backup in backup server) in master server
15. Arrange monitor at prosteam output with L-Band converter
16. Add redundancy & check prostream output (ID -11 to add redundancy).
Conditional Access steps:
1. Tune for new service in auto configuration wizard
2. Change name for the new channel as ETV-Cinema / (Note:-check multiple keys or single key)/
3. Create product and mention tag as ETVCIN
4. Put scrambling 'ON' and add product & Nationality
5. Check downlink with conditional access commands on the new channel as well as old receivers
6. After that disable 13th channel. (No 14th channel will appear in CA)
1. After finishing all settings in the PISYS Server , reset both the Online and Standby SAS.7. We require all the MPEG 4 Smartcards numbers list from Pay channel Dept. with appropriate syntax in the Floppy Disk.
8. Send Homing Channel data to all the MPEG 4 Receivers through PISYS Server.
9. Tune all the MPEG 4 Receivers by SHTUNE command from PISYS Server.
10. Before implementing, all the above steps to be tested in our Teleport Lab.
No comments:
Post a Comment